 | | | apache won 't work behind NAT router? | apache won 't work behind NAT router? 2004-03-14 - By Ted
Well, I had the same problem with LinkSys. The router would get confused
when testing from the same machine as the server. When calling LinkSys
they were in total denial and all they could offer was "While holding down
the red reset button, plug in the power...".
The top-rated router from
Zyxel
http://www.zyxel.com/product/model.php?indexcate=1022044503&indexcate1=
&indexFlagvalue=1021873683
does everything you could wish, up to and including VPN. The Zywall 10 is
a tremendous product and is configurable by port in every mode. Even
includes controls for DYDNS.
You can but one on Ebay for ??, Current bid is $61. Then you update the
firmware and you're good to go. As the unit has 1 WAN and ! LAN port,
you'll need a cheap switch behind it to distribute to all your
machines. You can get a 4-port switch new for about $30.
Good luck. It's a pain using these cruddy routers. <snip> LinkSys are you
listening? </snip>.
Ted
At 12:18 AM 3/15/2004 +0800, you wrote:
>thanks Ted,
>i follow your advise and setup another machine to do a dial-up and now i
>can see my webpage when i key in my domain "technet.dyndns.biz"
>regarding the ipNAT loopback... i telnet into my router and can't seems to
>have that function? my is a low-end router/switch. the web interface also
>don't seems to have that fuction. all it can do is static IP or port
>forwarding. only...
>anyway thanks for your help...
>
>Ted wrote:
>
>>You need to turn on loopback. Ask your router manufacturer. For mine, I
>>issue the command "IP NAT loopback on". I assume you're testing from the
>>same machine as the server. Try testing from an outside machine and see
>>what happens.
>>
>>T
>>
>>
>>At 10:00 PM 3/14/2004 +0800, you wrote:
>>
>>>dear sir,
>>>i setup a apache server behind a NAT router.
>>>my virtual host name is "technet.dyndns.biz"
>>>i configure my NAT router to do HTTP port:80 forwarding to my apache
>>>server at 192.168.100.120
>>>my NAT router WAN interface IP address is dynamic by ISP.
>>>private NAT router IP is 192.168.100.128
>>>then i register a free domain name "technet.dyndns.biz" with
>>>DYNDNS.org.
>>>i have a dynamic client s/w "ddclient.rpm" to do DNS updates every time
>>>my apache server bootup.
>>>
>>>i always goto the DYNDNS.org to double check my WAN IP is correctly updated.
>>>but .................
>>>when i access the URL:http://technet.dyndns.biz/
>>>it always shows my NAT router login page instead!!!
>>>when i ping technet.dyndns.biz is returns the IP address of my WAN
>>>interface.
>>>
>>>i duno whatz wrong?
>>>pls help me
>>>
>>>thank Q!
>>>
>>>
>>>---------------------------------------------------------------------
>>>The official User-To-User support forum of the Apache HTTP Server Project.
>>>See <URL:http://httpd.apache.org/userslist.html> for more info.
>>>To unsubscribe, e-mail: users-unsubscribe@(protected)
>>> " from the digest: users-digest-unsubscribe@(protected)
>>>For additional commands, e-mail: users-help@(protected)
>>
>>
>>
>>---------------------------------------------------------------------
>>The official User-To-User support forum of the Apache HTTP Server Project.
>>See <URL:http://httpd.apache.org/userslist.html> for more info.
>>To unsubscribe, e-mail: users-unsubscribe@(protected)
>> " from the digest: users-digest-unsubscribe@(protected)
>>For additional commands, e-mail: users-help@(protected)
>>
>
>
>
>
>---------------------------------------------------------------------
>The official User-To-User support forum of the Apache HTTP Server Project.
>See <URL:http://httpd.apache.org/userslist.html> for more info.
>To unsubscribe, e-mail: users-unsubscribe@(protected)
> " from the digest: users-digest-unsubscribe@(protected)
>For additional commands, e-mail: users-help@(protected)
---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: users-unsubscribe@(protected)
" from the digest: users-digest-unsubscribe@(protected)
For additional commands, e-mail: users-help@(protected)
|
|
|