I thought later about mentioning this, and that's exactly right.
I always use the free memtest86 http://memtest86.com to test the
memory sub-system before deploying.
Sometimes I turn down the FSB and the memory bus speed, makes the crashes
go away.
Oscar
On Thu, 15 Jan 2004, Christopher Schultz wrote:
> All,
>
> > With RH8, I assume that at the very least you'll need to set
> > LD_KERNEL_ASSUME.
> >
> > I would consider that the first course of action, and likely would not
> > need to do anything else. I could see hyperthreading a problem if the
> > kernel didn't support it very well. You could try the latest 2.4.x kernel.
>
> If the LD_ASSUME_KERNEL doesn't help, try disabling both SMP and
> hyperthreading at the same time. I think that's your next most likely fix.
>
> Just a note: I've had big, beefy servers die with SIG11 on Linux before
> (or course, that was back when a dual athlon 1GHz was considered 'beefy'
> :). Anyway, we tried everything, including hiring BEA consultants for a
> bazillion dollars per hour to help us tune both Weblogic and our VM.
>
> It turned out to be bad hardware. We had six identical machines and two
> of 'em kept crapping out. They just sucked. The only solution was to
> send them back to the manufacturer and ask for more. It turns out that
> not only did those two (production!) machines suck, but two QA machines
> and one dev machine (all the same) sucked, too. They all died when we
> put them under high load. They seemed to do okay under development load
> (about zero).
>
> I'll never buy a machine from "Penguin Computing" again.
>
> Just wanted to mention that sometimes it's not the software's fault. Do
> you have other similar machines that you can try this on?
>
> -chris
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@(protected)
> For additional commands, e-mail: tomcat-user-help@(protected)
>
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@(protected)
For additional commands, e-mail: tomcat-user-help@(protected)